One way to install windshields on model airplanes without causing harm from the heat guns is to first make a template of the windshield on a cardboard or any card paper. The next step is to trace the template on a plastic sheet and carefully cut it according to the shape. Once done, you have to screw the cut template on the model. This will act as a support for the plastic shield. Carefully remove the top screws onto the top of the card template, place the plastic on it and reinstall the screws. After this, use the heat gun starting from the top radius and gently pulling the plastic into shape as well. Care is required in the use of heat gun as excess heat may end up with blisters on the plastic. Continue to use the heat gun all along the plastic and put screws as well. This process can be repeated for the other side of the Model. Wait for the plastic to cool down and then remove the screws and the windshield template. The windshield is ready to be placed on the Model. Once the windshield is cleaned it can be screwed back in its place. Of course, it is also a good idea to use and paste electrical tape cut in half lengthwise, which helps maintain easy repairs of the windshield. Glue can also be applied to make it stronger. Similar method can be applied to the rear window. However, saving these templates can help you out in future for any broken or repair needs. Now that you know what is involved in installing windshields into airplanes, it is time to get your car windshield replaced, as the windshield of your automobile is as important as the windshield on an airplane. Contact your local windshield replacement dealer, or auto shop today and get your cracked or shattered auto glass replaced or repaired. If you live in Aurora call Aurora Auto Glass for your windshield replacement needs. Click windshield replacement Aurora to read more. Also, Autoglass Wizard is minutes away from Brampton in Mississauga and you can get your windshield replaced there quickly, and at an affordable price.